Type: 2-5000

Description

Single pole thermal circuit breaker with press-to-reset, tease-free, trip-free, snap action mechanism. Type 2-5000 is available with optional manual release (-H), (R-type TO CBE to EN 60934 in press-to-reset configuration; M-type when fitted with manual release -H), flange mounting. Options include an additional unprotected circuit tap (-A3).

Approved to CBE standard EN 60934 (IEC 60934).

Voltage rating
  • AC 250 V
  • DC 28 V
  • UL/CSA: DC 50 V
Current ratings from 0.05 A until 25 A  
Number of poles single pole
Mounting method flange
Terminal design blade terminals
screw terminals
Actuation push button
Auxiliary contacts without auxiliary contacts
Water splash protection with water splash protection
without water splash protection
Illumination without illumination
Typical life 0.05...16 A 5,000 operations at 2 x IN, inductive

17...25 A 5,000 operations at 2 x IN, resistive
Interrupting capacity Icn 0.05...2.5 A: 8 x IN

3...5 A: 20 x IN

6...12 A: 200 A (higher interrupting capacity available to special order)

13...25 A: 400 A
Certificates VDE, CSA, UL, SEV, CCC

Accessories

Order number Description
Y 300 476 01 splash cover transparent
Y 300 728 01 splash cover
Y 301 056 02 fixing plate
Y 303 563 01 busbar

Applications

  • Household, Hobby & Garden Equipment
  • Lighting technology
  • Minus DC 48 V

Downloads

Datasheet & Explanations

Resources:

Fuse vs. circuit breaker: How to choose the right device for your application

Is a fuse or circuit breaker best for your design? Here are some pointers to help you decide. Three main factors go into choosing between circuit breakers and fuses: Convenience for the user, cost, and degree of protection. This white paper will give you guidance on what circuit protection device is best for your equipment.

Read White Paper

12 Most Common Mistakes When Specifying Circuit Protection for Equipment

It's only a circuit breaker. Yet there is enough complexity and confusion when it comes to specifying circuit protection that many engineers are designing equipment with too little or too much protection. Under protected circuits leave equipment vulnerable to damaging electrical surges. Over protected circuits add cost and can lead to nuisance tripping. Like Goldilocks and the three bears, the goal is to specify circuit protection that is "just right".

Read White Paper

Virtual Assistant
Quickselect: Products Jobs Support About E-T-A
Call An Expert
Sie haben Fragen, Anregungen oder Wünsche? Wir beraten Sie gerne.