Type: 1110

Description

Single pole switch/thermal circuit breaker (S-type TO CBE to EN 60934) with tease-free, trip-free, snap action mechanism. Designed for snap-in panel mounting utilising round hole or industry standard fuse-holder cut-out dimensions. Featuring an ergonomically styled two colour actuator with indicator band clearly showing the tripped/OFF position.

Approved to CBE standard EN 60934 (IEC 60934).

Voltage rating
  • AC 250 V
  • DC 50 V
  • UL/CSA: DC 50 V
Current ratings from 0.05 A until 16 A  
Number of poles single pole
Mounting method flange
Terminal design blade terminals
Actuation push button
Auxiliary contacts without auxiliary contacts
Water splash protection with water splash protection
without water splash protection
Illumination without illumination
Typical life AC: 0,05...10 A 10 000 operations

DC: 0,05...10 A 6 000 operations

DC: 12...16 A 2 000 operations
Interrupting capacity Icn AC 250 V:

0.05...10 A: 8 x IN

DC 50 V:

0.05...6.5 A: 65 x IN

7...16 A: 130 A

DC 28 V:

7...10 A: 200 A

Certificates VDE, CSA, UL

Accessories

Order number Description
Y 304 745 01 splash cover transparent
Y 305 602 01 splash cover black

Applications

  • Household, Hobby & Garden Equipment
  • Lighting technology
  • Medical technology
  • Minus DC 48 V
  • Telecom & Datacom
  • Watercraft & Vehicles

Downloads

Datasheet & Explanations

Resources:

Fuse vs. circuit breaker: How to choose the right device for your application

Is a fuse or circuit breaker best for your design? Here are some pointers to help you decide. Three main factors go into choosing between circuit breakers and fuses: Convenience for the user, cost, and degree of protection. This white paper will give you guidance on what circuit protection device is best for your equipment.

Read White Paper

12 Most Common Mistakes When Specifying Circuit Protection for Equipment

It's only a circuit breaker. Yet there is enough complexity and confusion when it comes to specifying circuit protection that many engineers are designing equipment with too little or too much protection. Under protected circuits leave equipment vulnerable to damaging electrical surges. Over protected circuits add cost and can lead to nuisance tripping. Like Goldilocks and the three bears, the goal is to specify circuit protection that is "just right".

Read White Paper

Virtual Assistant
Quickselect: Products Jobs Support About E-T-A
Call An Expert
Sie haben Fragen, Anregungen oder Wünsche? Wir beraten Sie gerne.