Type: 1170

Description

Compact single pole thermal circuit breaker with push-to-reset, tease free, trip free, snap action mechanism and separate (colour coded) manual release. Combining full feature circuit breaker protection and convenience with low cost of ownership benefits. Fitted with blade terminals for plug-in mounting.

Type III to SAE J 553.

Version 1176 is available especially for the automotive industry (current ratings correspond to those of blade fuses).

Voltage rating
  • DC 28 V
Current ratings from 3 A until 25 A  
Number of poles single pole
Mounting method socket
Terminal design blade terminals
Actuation manual release
push button
Auxiliary contacts without auxiliary contacts
Water splash protection without water splash protection
Illumination without illumination
Typical life at rated current:

3...25 A 6,000 opeations at IN

3...20 A 3,000 opeations at 2 x IN

25 A 1,000 opeations at 2 x IN
Interrupting capacity Icn 400 A

Accessories

Order number Description
12-P10/-J20/-A10 sockets
X 210 588 01-04 Connector bus links -P10
01 = 1.5 mm2 brown
02 = 2.5 mm2 black
03 = 2.5 mm2 red
04 = 2.5 mm2 blue
X 211 157 01/02 busbar for mounting socket
01 = with terminal
02 = without terminal

Applications

  • Automobiles
  • Commercial Vehicles
  • Lighting technology
  • Rail vehicles
  • Watercraft & Vehicles

Downloads

Datasheet & Explanations

Resources:

Fuse vs. circuit breaker: How to choose the right device for your application

Is a fuse or circuit breaker best for your design? Here are some pointers to help you decide. Three main factors go into choosing between circuit breakers and fuses: Convenience for the user, cost, and degree of protection. This white paper will give you guidance on what circuit protection device is best for your equipment.

Read White Paper

12 Most Common Mistakes When Specifying Circuit Protection for Equipment

It's only a circuit breaker. Yet there is enough complexity and confusion when it comes to specifying circuit protection that many engineers are designing equipment with too little or too much protection. Under protected circuits leave equipment vulnerable to damaging electrical surges. Over protected circuits add cost and can lead to nuisance tripping. Like Goldilocks and the three bears, the goal is to specify circuit protection that is "just right".

Read White Paper

Virtual Assistant
Quickselect: Products Jobs Support About E-T-A
Call An Expert
Sie haben Fragen, Anregungen oder Wünsche? Wir beraten Sie gerne.