Type: 127

Description

Single pole thermal circuit breaker with push-to-reset, tease-free, trip-free, snap action mechanism (R-type TO CBE to EN 60934; M-type when fitted with optional manual release feature). Available in versions for plug-in or integral mounting, track mounting, or with a frame for snap-in panel mounting. The optional KF housing is particularly suited to high humidity and other damp conditions.

Approved to CBE standard EN 60934 (IEC 60934).

Voltage rating
  • AC 250 V
  • DC 28 V
  • UL: DC 50 V
Current ratings from 0.05 A until 25 A  
Number of poles single pole
Mounting method flange
socket
rail mounting
Terminal design blade terminals
screw terminals
Actuation manual release
push button
Auxiliary contacts without auxiliary contacts
Water splash protection without water splash protection
Illumination without illumination
Typical life 0.05...16 A 5,000 operations at 2 x IN, inductive

17...25 A 5,000 operations at 2 x IN, resistive
Interrupting capacity Icn 0.05...2.5 A. 8 x IN

3...5 A: 20 x IN

6...12 A: 200 A

13...25 A: 400 A
Certificates VDE, CSA, UL, CCC (Type 127-T.. approvals N/A)

Accessories

Order number Description
10F-P10/-K10/-A10 mounting sockets
X 210 588 01-04 Connector bus links -P10
01 = 1.5 mm2 brown
02 = 2.5 mm2 black
03 = 2.5 mm2 red
04 = 2.5 mm2 blue
X 210 589 01/02 Connector bus links -K10
01 = 2.5 mm2 black
02 = 1.5 mm2 brown
Y 301 166 01/02 busbar
01 = 4-way
02 = 2-way

Applications

  • Minus DC 48 V
  • Telecom & Datacom

Downloads

Datasheet & Explanations

Resources:

Fuse vs. circuit breaker: How to choose the right device for your application

Is a fuse or circuit breaker best for your design? Here are some pointers to help you decide. Three main factors go into choosing between circuit breakers and fuses: Convenience for the user, cost, and degree of protection. This white paper will give you guidance on what circuit protection device is best for your equipment.

Read White Paper

12 Most Common Mistakes When Specifying Circuit Protection for Equipment

It's only a circuit breaker. Yet there is enough complexity and confusion when it comes to specifying circuit protection that many engineers are designing equipment with too little or too much protection. Under protected circuits leave equipment vulnerable to damaging electrical surges. Over protected circuits add cost and can lead to nuisance tripping. Like Goldilocks and the three bears, the goal is to specify circuit protection that is "just right".

Read White Paper

Virtual Assistant
Quickselect: Products Jobs Support About E-T-A
Call An Expert
Sie haben Fragen, Anregungen oder Wünsche? Wir beraten Sie gerne.