Type: MPR20
Description
The MPR20 is a monostable electro-mechanical power relay. Its integral electronic control circuitry helps reduce power consumption in the holding power by the factor 10 compared to standard power relays. It can both switch and carry 300 A. In the event of a power disruption, the relay will at once go into its original state due to its monostable design. This provides more safety and reliability. Reduction of holding power and of the pull-in power allows direct connection to the controlgear and provides additional cost reduction and environmental advantages despite a monostable design. By using standard termination technologies and mounting dimensions, the MPR20 can easily and quickly replace conventional relays.
- Reduced fuel consumption and CO2 emission due to an 90 % lower holding power
- Flexible installation for demanding applications due to a robust, waterproof and dust-proof design
- Reduced installation time through direct connection to the controlgear
NEW! Now also available with robust plug-in connector - compatible with the HDSCS connector series
NEW! Extension to 48 V in the load circuit
Saves time and costs
- through quick and fault-free mounting
- thanks to isolation of the control contacts from environmental influences
- through high resistance against vibration and mechanical stress
| Voltage rating |
DC 12 V DC 24 V DC 48 V |
|---|---|
| Operating voltage |
DC 16...32 V DC 9...16 V |
| Continuous current |
100 A 200 A 300 A |
| Number of poles | 1-pole |
| Temperature range | -40 °C …. + 85 °C |
| Terminal design |
Load terminals M8 or M10 Control terminals M4 resp. HDSCS |
| Mounting method |
M4 connectors side and foot foot flange holes with compression limiter side flange |
| Design | Cylindrical enclosure |
| Feature |
Mechanical power relay for harsh application conditions. Particularly power-saving thanks to the electronic control of the monostable drive, which reduces power consumption during operation by a factor of 10. |
| Contact system type | mechanical |
| Certificates | KBA E1 (ECE-R10) |
Applications
- Automated guided vehicles (AGV)
- Automobiles
- Commercial Vehicles
- Forklifts
- Rail vehicles
- Watercraft & Vehicles
You might be interested in...
MPR10 Bistable Power Relay
- 12V and 24V
- 100 to 300 Amps Continuous
- Bistable design
- Weight savings of 50%
- Protection IP 6K 9K
- Low holding current
HPR10 Hybrid Power Relay
- 12V and 24V
- 100 to 300 Amps Continuous
- Programmable Electronic Control Circuitry
- Low voltage detection, ON/OFF Delay, Pulse or Level activation, Input signal filter
- Protection IP 6K 9K
- Low holding current
EPR10 Electronic Power Relay
- 12V and 24V
- 75 Amps to 200 Amps Continuous
- Suited for Harsh Environments
- Compact: No heat sink required
- No arcing: Safe in enclosed spaces