Type: MPR10


~ 91 mm

The single pole power relays MPR10 and HPR10 have been designed for switching high current loads and for disconnecting the battery from the on-board electrical system. The mechanical power relay type MPR10 is:

  • are energy saving and help to reduce the CO2 emissions
  • are ideally suitable for high loads
  • can easily be integrated into existing vehicle designs
  • can directly be used without any changes on the controlgear

The MPR10 is a bistable relay, i.e. a short current impulse is required only for the switching operation. The contact is then held in its position by permanent magnets without current.

NEW! Now also available with robust plug-in connector - compatible with the HDSCS connector series
NEW! Extension to 48 V in the load circuit

Saves time and costs

  • through quick and fault-free mounting
  • thanks to isolation of the control contacts from environmental influences
  • through high resistance against vibration and mechanical stress

Voltage rating DC 12 V
DC 24 V
DC 48 V
Operating voltage DC 16...32 V
DC 9...16 V
Continuous current 100 A
200 A
300 A
Number of poles 1-pole
Physical isolation of load circuit 1 (NO)
Temperature range -40° C … +85° C
Terminal design Load terminals M8 or M10
Control terminals M4 resp. HDSCS
Mounting method M4 connectors side and foot
foot flange
holes with compression limiter
side flange
Design Cylindrical enclosure
Feature Mechanical power relay for harsh application conditions.

Extremely power saving due to a bistable drive, which only needs energy during switching operations.
Contact system type mechanical


  • Automated guided vehicles (AGV)
  • Automobiles
  • Commercial Vehicles
  • Forklifts
  • Rail vehicles
  • Watercraft & Vehicles


Datasheet & Explanations

You might be interested in...

MPR20 Monostable Power Relay

  • 12V and 24V
  • 100 to 300 Amps Continuous
  • Monostable design
  • Weight savings of 50%
  • Protection IP 6K 9K
  • Low holding current

Learn More About the MPR20

HPR10 Hybrid Power Relay

  • 12V and 24V
  • 100 to 300 Amps Continuous
  • Programmable Electronic Control Circuitry
  • Low voltage detection, ON/OFF Delay, Pulse or Level activation, Input signal filter
  • Protection IP 6K 9K
  • Low holding current

Learn More About the HPR10

EPR10 Electronic Power Relay

  • 12V and 24V
  • 75 Amps to 200 Amps Continuous
  • Suited for Harsh Environments
  • Compact: No heat sink required
  • No arcing: Safe in enclosed spaces

Learn More About the EPR10

Virtual Assistant
Quickselect: Products Jobs Support About E-T-A
Call An Expert
Sie haben Fragen, Anregungen oder Wünsche? Wir beraten Sie gerne.