Type: 2210-T2

Description

One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Featuring a combi-foot design for both symmetric and asymmetric rail mounting. Available with auxiliary contact (1 x N/O or 1 x N/C) for status signalling. Two and three pole models are internally linked to ensure that both/all poles trip in the event of an overload on one pole, even if the actuator is held in the ON position. This CBE can be supplied in current ratings up to 32 A with a choice of characteristic curves. All screw terminals are recessed for safety.

Approved to CBE standard EN 60934 (IEC 60934).

Voltage rating
  • 3 AC 433 V (50/60 Hz)
  • AC 250 V
  • DC 65 V (higher voltage to special order)
  • UL/CSA: AC 277 / 480 V
Current ratings from 0.1 A until 32 A  
Number of poles single pole
double pole
three pole
Mounting method rail mounting
Terminal design screw terminals
Actuation manual release
toggle/baton
Auxiliary contacts with auxiliary contacts
without auxiliary contacts
Water splash protection without water splash protection
Illumination without illumination
Typical life 10,000 operations at 1 x IN, inductive
Interrupting capacity Icn 0.1...5 A: 400A

6...32 A: 800 A

0.1...16 A: 2 500 A (at DC 32 V)
Certificates GL, VDE, CSA, UL

Accessories

Order number Description
Y 307 851 01 plug-on cap
Y 308 498 01 busbar 1-pole
Y 308 499 01 busbar 2-pole
Y 308 500 01 busbar 3-pole
Y 308 503 01 supply terminal
Y 308 506 01 plug-on cap

Applications

  • (Steel industry)
  • Automation
  • Automobile production
  • Chemical, Oil & Gas
  • Mechanical engineering
  • Pharmaceutical & Food
  • Power Engineering AC 240 V
  • Power Engineering DC 24 V
  • Rail vehicles

Resources:

Differences and Similarities Between K Curve and D Curve Breakers

A Miniature Circuit Breaker (MCB) is a resettable protective device that prevents electrical circuits from catching fire and causing damage to personnel and property. It is a device designed to isolate a circuit during an overcurrent event without using a fusible element. There are two types of overcurrent events; a thermal overload and a short circuit.

Read White Paper

Improve Plant Production by Addressing 24VDC Switch-Mode Power Supply Issues

For most industries, the accepted norm for unplanned downtime is 5% of operating time, which represents a direct, significant loss of revenue and therefore profit. But have you ever stopped to consider the true cost of downtime?  Read the latest white paper from E-T-A to see how the integration of electronic circuit control technology can reduce the downtime of your 24VDC system designs.

Read White Paper

Virtual Assistant
Quickselect: Products Jobs Support About E-T-A
Call An Expert
Sie haben Fragen, Anregungen oder Wünsche? Wir beraten Sie gerne.