The single pole power relays MPR10 and HPR10 have been designed for switching high current loads and for disconnecting the battery from the on-board electrical system. The mechanical power relay type MPR10 is:
- are energy saving and help to reduce the CO2 emissions
- are ideally suitable for high loads
- can easily be integrated into existing vehicle designs
- can directly be used without any changes on the controlgear
The MPR10 is a bistable relay, i.e. a short current impulse is required only for the switching operation. The contact is then held in its position by permanent magnets without current.
DC 12 V
DC 24 V
DC 16...32 V
DC 9...16 V
|Number of poles||1-pole|
|Physical isolation of load circuit||1 (NO)|
|Temperature range||-40° C … +85° C|
M4 connectors side and foot
holes with compression limiter
Mechanical power relay for harsh application conditions.
Extremely power saving due to a bistable drive, which only needs energy during switching operations.
|Contact system type||mechanical|
- Commercial Vehicles
- Rail vehicles
- Watercraft & Vehicles