Press Release Archive

7/13/2011: E-T-A introduces the “Coolest” Type II MINI Circuit Breaker in the Market

E-T-A Circuit Breakers is pleased to announce the release of the Type II version of the 1620 MINI thermal automotive circuit breaker.  After rigorous research, development and testing the E-T-A Type II circuit breaker with modified reset has the lowest operating temperature in the MINI circuit protection market... more

6/15/2011: E-T-A Introduces the SVS16 ProfiBus Power Distribution System - Intelligent sub-system for power distribution of the Process & Control layer of any automation architecture

E-T-A Circuit Breakers is pleased to announce the new SVS16-PB-08 ProfiBus power distribution and remote output system.  The SVS16 provides selective over current protection, power distribution to load circuits as well as switching, protection and monitoring of digital outputs to field devices up to 10 A...More

7/7/2010:Power Relays For Single-Pole Switching of Loads in Trucks, Buses, Construction Machinery and Military Vehicles

E-T-A Circuit Breakers is pleased to announce the PR60 & PR80 Power Relays as the latest addition to its products are designed for the commercial vehicle market.  The PR60 is a monostable relay containing one coil and one resting position. The PR80 is a bistable relay containing two coils and two resting positions.  It is switched ON through an impulse and remains in the ON position until it is switched off by an additional impulse... More

6/1/2010:Rail-mounted Double Pole Electronic Circuit Breaker For Protection of Ungrounded Equipment and Subsea Applications

E-T-A Circuit Breakers is pleased to announce the introduction of the ESS22-T rail-mounted electronic circuit breaker.  Intended for the use in ungrounded systems, the ESS22-T is the ideal solution for select types of medical equipment and subsea applications.  The ESS22-T is designed with selective disconnection and double-pole physical isolation of loads which allows the product to only disconnect the faulty load...  More

 

12/4/09: 1620/1626 MINI Circuit Breaker Series for Protection of Electrical Systems in Cars, Trucks, Buses and Other Specialty Vehicles

E-T-A Circuit Breakers is pleased to announce the 1620/1626 MINI CBE product series - the latest addition to its thermal automotive product line.  Designed for use with the mini-sized terminal blocks, the 1620, with a standard trip curve, is the first circuit protection device in the market to meet all the requirements of the four SAE J553 type classes (I, II, III, and III*) in the miniature package.  More

 

9/29/09: ESX10-T Now CSA Approved for Installation into Class I, Division 2 Group A, B, C and D Applications

E-T-A Circuit Breakers announces the ESX10-T Solid State Overcurrent Protector - Now CSA approved for installation into Class I, Division 2 - Group A, B, C, and D applications. The ESX10-T combines purely electronic trip characteristics and active current limitation to allow selective disconnection of loads connected to 24VDC power supplies.  More

 

10/22/08: ESX10-T Class I, Division 2 and UL 508 Approved

E-T-A Circuit Breakers announces the ESX10-T Electronic Circuit Protector now with Class I, Division 2 - Group A, B, C, and D, UL 1604 certification and UL 508 approval. The remarkably compact device combines purely electronic trip characteristics and active current limitation to allow selective disconnection of loads connected to 24VDC power supplies... more

 

9/3/08: ESX0-T Now Certified to Class I, Division 2 Standard

E-T-A Circuit Breakers announces the ESX10-T Electronic Circuit Protector now with Class I, Division 2 - Group A, B, C, and D, UL 1604 certification. The remarkably compact device combines purely electronic trip characteristics and active current limitation to allow selective disconnection of loads connected to 24VDC power supplies. Selective load protection prevents complete shutdown of the system by quickly disconnecting the faulty path when an overload or short circuit occurs... More

 

 

9/01/08: 4220-T Thermal-Magnetic Circuit Breaker

E-T-A Circuit Breakers is pleased to announce the 4220-T circuit breaker – The most recent addition to its din rail mount product line.  With a width of only 12.5 mm, the 4220-T allows maximum utilization of cabinet space in automated equipment in a wide range of industries... more

 

E-T-A Circuit Breakers announces the ESX10-T Electronic Circuit Protector, a remarkably compact device combining purely electronic trip characteristics and active current limitation to allow selective disconnection of loads connected to 24VDC power supplies. Selective load protection prevents complete shutdown of the system by quickly disconnecting the faulty path when an overload or short circuit occurs... more

 

 

10/16/07: 8345 Available with ON/OFF Actuation

E-T-A Circuit Breakers is pleased to announce the availability of remote ON/OFF actuation for its award winning 8345 hydraulic-magnetic circuit breaker.  The 8345, in combination with this motor-driven remote switch module, provides remote ON/OFF and reset functionality as well as overcurrent protection all in one unit... more

 

09/07: 1120 - Thermal Overcurrent Circuit Breaker

E-T-A Circuit Breakers is pleased to announce the availability of its new 1120 thermal over current circuit breaker with an integrated rocker actuated ON/OFF switch.  The 1120 has been specifically designed for single-phase applications and offers snap-in front panel mounting - making it the ideal solution for the protection of office equipment, power tools, power strips and other consumer and commercial appliances... more

Press - Contact Info

If you would like to contact E-T-A regarding press releases or materials, please contact:

Ellen J. Albright
E-T-A Circuit Breakers
Marketing & Communications Director
1551 Bishop Court
Mt. Prospect, IL  60056
Phone: (847) 827-7600
Fax: (847) 827-7655

Email

Virtual Assistant
Quickselect: Products Jobs Support About E-T-A
Call An Expert
Sie haben Fragen, Anregungen oder Wünsche? Wir beraten Sie gerne.