Type: E-1048-7..
The E-T-A Solid State Remote Power Controller E-1048-7.. is a transistorised switching device providing both protection and signalisation. It is suitable for all applications where the capabilities of the existing PLC outputs are not sufficient or where no protection against overload and short circuit or wire breakage monitoring of connected loads is provided. The use of a costly, high-capacity output card becomes superfluous when only one or two powerful outputs are necessary.
Using the SSRPC E-1048-7.. in combination with the module 17plus creates a new, very flexible system capable of being subsequently changed or extended. Busbars, pre-wired signal contacts and spring-loaded terminals reduce installation times considerably (see accessories).
Technical Data
| Number of poles: | |
|
|
| Signal outputs: | |
| fault indication via relay (N/C contact) |
|
| Display: | |
| ON indication fault indication |
|
| Voltage rating of load: | |
|
|
| Operating voltage of SSRPC: | |
|
|
| Mounting method: | |
|
Accessories
| Order number | Description |
| 17plus | power distribution system |
| 17-P10-Si/-20025 | sockets |
| 17-P70-Si/-20025 | sockets |
| 23-P10-Si | socket |
| 63-P10-Si | socket |
| SB-S11-P1-01-1-1A | jumper |
| X 200 409 01 | adapter for socket 16 for track mounting |
| X 210 588 01-04 | Connector bus links -P10 01 = 1.5 mm2 brown 02 = 2.5 mm2 black 03 = 2.5 mm2 red 04 = 2.5 mm2 blue |
| X 211 156 01 | screw terminal |
| X 222 004 01 | end bracket |
| X 222 005 01-03 | signal busbar 01 = blue 02 = red 03 = grey |
| Y 300 504 02 | mounting clip |
| Y 300 581 03 | retaining clip for socket |
| Y 300 581 11 | retaining clip for socket |
| Y 303 824 01 | insulation sleeving for busbar |
| Y 307 016 01/11 | busbar |
| Y 307 754 01 | retaining clip |
| Y 307 942 61 | label |
| X 211 157 01/02 | busbar for mounting socket 01 = with terminal 02 = without terminal |
Applications
- Automation & Process Control
- Steel Production
- Automation
Downloads
Product Flyer306 K