Products in the Press

E-T-A is pleased to announce the latest addition to its line of electronic circuit protection products.  The ESX10-TC is a 12 V DC version of the ESX10-T, 24 V DC product offering and is designed for SCADA/RTU applications – providing optimal protection for both 12 V DC switch-mode power supplies and solar/battery based systems...more

E-T-A Circuit Breakers is pleased to announce the release of the Type II version of the 1620 MINI thermal automotive circuit breaker.  After rigorous research, development and testing the E-T-A Type II circuit breaker with modified reset has the lowest operating temperature in the MINI circuit protection market... more

E-T-A Circuit Breakers is pleased to announce the new SVS16-PB-08 ProfiBus power distribution and remote output system.  The SVS16 provides selective over current protection, power distribution to load circuits as well as switching, protection and monitoring of digital outputs to field devices up to 10 A...More

E-T-A Circuit Breakers is pleased to announce the PR60 & PR80 Power Relays as the latest addition to its products are designed for the commercial vehicle market.  The PR60 is a monostable relay containing one coil and one resting position. The PR80 is a bistable relay containing two coils and two resting positions.  It is switched ON through an impulse and remains in the ON position until it is switched off by an additional impulse... More

E-T-A Circuit Breakers is pleased to announce the introduction of the ESS22-T rail-mounted electronic circuit breaker.  Intended for the use in ungrounded systems, the ESS22-T is the ideal solution for select types of medical equipment and subsea applications.  The ESS22-T is designed with selective disconnection and double-pole physical isolation of loads which allows the product to only disconnect the faulty load...  More

• 1620/1626 MINI Circuit Breaker Series for Protection of Electrical Systems in Cars, Trucks, Buses and Other Specialty Vehicles
• ESX10-T Now CSA Approved for Installation into Class I, Division 2 Group A, B, C and D Applications
• ESX10-T Class I, Division 2 and UL 508 Approved
• 4220-T Thermal-Magnetic Circuit Breaker