|
Remotely Resettable Electronic Circuit Protector: ESX10-TThe ESX10-T Electronic Circuit Protector combines purely electronic trip characteristics and active current limitation to allow selective disconnection of loads connected to 24 VDC power supplies. Selective load protection prevents complete shutdown of the system by quickly disconnecting the faulty path when an overload or short circuit occurs. Remote operation is possible by means of a remote reset signal or a remote ON/OFF control signal.
The ESX10-T is approved to UL 1604 (class I, div. 2) and CSA C22.2 NO:213 to make it appropriate for protection of equipment in hazardous locations and is also UL 508 approved. Active current limitation allows the ESX10-T to respond much faster to overload or short-circuit conditions than the power supply. It limits the highest possible current to 1.3 to 1.8 times the rated capacity and is capable of switching on capacitive loads up to 20,000 µF - with disconnection only in the event of an overload or short circuit. Conventional protective elements cannot manage this as they either respond too slowly or are susceptible to nuisance tripping due to inrush currents.
Datasheet:
Engineering Drawings |
