 |
| |
| Dimensions |
 |
| |
|
|
|
|
Module 17plus is a power distribution system for use with electronic circuit protectors ESX10.
Each module accommodates two protectors with an individual housing width of only 12.5 mm and fits onto all industry standard mounting rails.
The two-way modules can be interconnected to provide as many ways as required with a terminal block fitted at each end for connection of signalling circuits. A distribution busbar can be fitted on the supply side of the modules (positive pole) though each pole of multipole circuit breakers must be individually connected.
Electrical connections are by means of spring-loaded terminals. The reference potential for the ESX10. (Gnd pin 11) is also looped through and connected to the terminal blocks at the sides.
The integral status output SF of the ESX10 can be tapped at terminal 12 of the relevant channel (single signalisation).
The reset input RE may be connected via terminal 13 or 14. Depending on the version a potential-free signal contact is available (ESX10-101/-105/-106). |
| |
| Voltage rating: |
DC 24 V with ESX10
|
| Current ratings: |
max. 50 A
|
| Signal output: |
| max. 0.5 A with ESX10 |
| Temperature range: |
0...+50 °C
|
| Terminal design: |
screwless terminals
|
| Mounting method: |
| on symmetrical rail |
|
Download
