 |
| |
| Dimensions |
 |
| |
|
|
|
|
Type ESX10-T expands our product range of electronic overcurrent protection for DC 24 V applications.
It provides selective protection of all DC 24 V load circuits at a width of only 12.5 mm. This is achieved by active current limitation in the event of a short circuit and overload disconnection from 1.1 times rated current. The ESX10-T features one single trip curve for all types of loads, e.g. capacitive loads up to 20,000 µF, d.c. motors, valve clusters. The integral fail-safe element has been adjusted to the current rating and the connected cable cross section.
The ESX10-T can be snapped onto symmetrical rails, ensuring ease of mounting in multiple circuits.
|
| |
| Voltage rating: |
DC 24 V (18...32 V)
|
| Current ratings: |
0.5 A
1 A
2 A
3 A
4 A
6 A
8 A
10 A
12 A
|
| Number of poles: |
1-pole
|
| Load disconnection: |
electronic disconnection
trip times:
short circuit: typically 100 ms
overload: typically 3...5 s
|
| Current limitation: |
typically 1.8 x IN
|
| Signal output: |
| DC 24 V / max. 0.5 A |
| Status indication: |
1 LED green/orange/red: status/fault
|
| Temperature range: |
-24...+50 °C
|
| Terminal design: |
screw terminals
|
| Mounting method: |
| on symmetrical rail |
| Approvals: |
UL 2367
UL 1604 (class I, div. 2, zone 2) pending |
|
Download
