The E-T-A Solid State Remote Power Controller E-1071-128 is an electronic ON/OFF control module with protective and signalling functions. It is suitable for inductive loads (solenoids, magnetic brakes) when the load circuit supply cannot be increased to the voltage level required
(e. g. DC 36 V). The operating status of the controller/load connected is continuously indicated and signalled via opto coupler. |
| |
| Voltage rating of load: |
DC 24 V
|
| Operating voltage of SSRPC: |
DC 20...48 V
|
| Current rating of load: |
0.01 - 0.31 A
|
| Number of poles: |
1-pole
|
| Short circuit current limitation: |
2.5 x IN
|
| Physical isolation of load circuit (after electronic overload disconnection): |
| after approx. 5 s |
| Signal outputs: |
| ON and fault indication via opto coupler |
| Display: |
control current
minimum current
ON indication
fault indication |
| Temperature range: |
0...+60 °C
|
| Mounting method: |
rail to
EN 50 022-35x7.5
|
Download
