The miniature Flow Meter FC03 is designed to operate with compressed air, oxygen and nitrogen. With one analogue output, one frequency output or one flow limit value. Sensor head integral with electronic circuitry.
When used in a compressed-air system, the FC03 has to be installed behind the air dryer to prevent moisture condensation of the sensors. Damage of the ceramic sensors through particles in the pipe system must be prevented by suitable filtering measures. |
| |
| Voltage rating: |
DC 24 V
|
| Input voltage: |
DC 24 V (18...32)
|
| Media: |
gases
- air
- compressed air
- oxygen O2
- nitrogen N2
|
| Measuring range: |
air: measuring range 0 in TP-01 0 - 6 Nm3/h
air: measuring range 1 in
TP-01 0 - 20 Nm3/h
TP-02 0 - 30 Nm3/h
TP-03 0 - 50 Nm3/h
TP-04 0 - 80 Nm3/h
TP-05 0 - 125 Nm3/h
TP-06 0 - 200 Nm3/h
air: measuring range 2 in
TP-01 0 - 50 Nm3/h
TP-02 0 - 75 Nm3/h
TP-03 0 - 125 Nm3/h
TP-04 0 - 200 Nm3/h
TP-05 0 - 310 Nm3/h
TP-06 0 - 500 Nm3/h
|
| Outputs/interfaces: |
FC03-C11...
4...20 mA non linear
FC03-F1/2
25/0...100 Hz non linear
FC03-R1
1 relay output, max. load 700 mA, switch contact in measuring range MB2
|
| Design: |
insertion-type
|
| Process connection: |
integral with electronic control unit
|
| Materials of monitoring head: |
Polyamide/Brass/Ceramics/ glass passivated
|
| Temperature range electronic control unit: |
from 0 °C to +60 °C
|
| Temperature range monitoring head: |
from 0 °C to +60 °C
|
| Protection class electronic control unit: |
IP64
|
| Protection class monitoring head: |
IP64 wetted parts
|
Download
