 |
| |
| Dimensions |
 |
| |
|
|
|
|
The E-T-A Current Protector is designed to monitor the primary current of low-voltage transformers for halogen fittings.
After system installation, the admissible current range can be stored by operating the storage button (or light switch, with type E-1078-482-...). If the admissible range is exceeded (e.g. by overloads or short-circuit), the Protector will immediately disconnect the system. Underload (e.g. through defective terminal connections) will also cause system disconnection.
Fault conditions are indicated by the integral LED. The system can be reconnected by turning the light switch on again once the cause of failure has been remedied. |
| |
| Voltage rating: |
AC 230 V +/-10%, 50 Hz
AC 120 V +/-10%, 60 Hz
|
| Supply voltage: |
AC 230 V
AC 120 V
|
| Lamp capacity (W), adjustable: |
60-300 W
100-300 W
100-400 W
300-600 W
|
| Typical trip times: |
overload: 200 ms...2 s (depending on overload)
short-circuit: 200 ms
underload: 3 s |
| Temperature range: |
from 0 °C to +60 °C
|
| Mounting method: |
surface mounted
|
|
Download
