我们的设备保护用断路器在工业自动化中保护，转换和监控各种各样的成分，汽车制造业中从单个工作母机去完成装配线。在过程控制业或在发电厂现场装配中的局部和中心控制技术是我们用于直流 24V 或交流 230V 的万能电源分配系统的典型应用。它们促进整个电气系统的特殊设计，配线，功能和维护。
中断和停工期将被几乎减少到零。
关于这个话题您有问题吗？我们来自自动化和过程控制部的专家将乐于协助您！
下面请找出您业务范围内一列相关产品。通过挑选出一个类别的产品您能直接比较它们的技术说明。
仅仅点击 “Product comparison”。
| Type: 2210-T2 |
|
 Download |
 |
| |
| Dimensions |
 |
| |
| Internal connection diagrams |
 |
|
|
One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Featuring a combi-foot design for both symmetric and asymmetric rail mounting. Available with auxiliary contact (1 x N/O or 1 x N/C) for status signalling. Two and three pole models are internally linked to ensure that both/all poles trip in the event of an overload on one pole, even if the actuator is held in the ON position. This CBE can be supplied in current ratings up to 32 A with a choice of characteristic curves. All screw terminals are recessed for safety.
Approved to CBE standard EN 60934 (IEC 60934). |
| |
| Voltage rating: |
- 3 AC 433 V (50/60 Hz)
- AC 250 V
- DC 65 V (higher voltage to special order)
- UL/CSA: AC 277 / 480 V
|
| Current ratings: |
from 0.1 A to 32 A for curves M1, T1, T2 (32 A resistive load only)
from 0.1 A to 16 A for curves F1, F2, M3
|
| Number of poles: |
single pole
double pole
three pole
|
| Mounting method: |
rail mounting
|
| Terminal design: |
screw terminals
|
| Actuation: |
manual release
toggle/baton
|
| Auxiliary contacts: |
with auxiliary contacts
without auxiliary contacts
|
| Water splash protection: |
without water splash protection
|
| Illumination: |
without illumination
|
| Typical life: |
| 10,000 operations at 1 x IN, inductive |
| Interrupting capacity Icn: |
0.1...5 A: 400A
6...32 A: 800 A
cuve T2: 0.1...32 A: 15 x IN
curve M3: 0.1...2 A: AC 200 A / DC 400 A |
| Approvals: |
| GL, VDE, CSA, UL |
|
